EZY-FLOAT - Light Weight Marble Render
Ezy-Float Light Weight Marble Render is a polymer modified, mineral based, and lightweight trowel-on render.
The product is supplied in a 20kg paper sack with a 13kg by volume fill. On site mixing requires only the addition of fresh clean water to a desired consistency.
No additional polymer additives are required and should not be added.
The product is a pre-blended powder mix that contains premium grade crushed marble, Type HE Portland Cement, conforming to Australian Standard 3972 and recycled high-density foam.
The product is modified with very high levels of flexible polymers and hydrophobic agents that ensure a well adhered flexible render with excellent resistance to water, efflorescence or rising damp.
Ezy-Float Light Weight Marble Render is designed for over-coating with acrylic textures and coatings combining to provide strong inter-coat adhesion. It bonds to most mineral and new construction surfaces, exhibiting minimal to no drying shrinkage.
Suitable Substrates:
•All masonry substrates.
•Concrete block.
•Hebel®.
•Wire cut clay block.
•Off form concrete.
•Unglazed brick.
DOWNLOADS - PDF
© Technical Bulletin
The product is a pre-blended powder mix that contains premium grade crushed marble, Type HE Portland Cement, conforming to Australian Standard 3972 and recycled high-density foam.
The product is modified with very high levels of flexible polymers and hydrophobic agents that ensure a well adhered flexible render with excellent resistance to water, efflorescence or rising damp.
Ezy-Float Light Weight Marble Render is designed for over-coating with acrylic textures and coatings combining to provide strong inter-coat adhesion. It bonds to most mineral and new construction surfaces, exhibiting minimal to no drying shrinkage.
Suitable Substrates:
•All masonry substrates.
•Concrete block.
•Hebel®.
•Wire cut clay block.
•Off form concrete.
•Unglazed brick.
DOWNLOADS - PDF
© Technical Bulletin