Language
Texture Coatings & Acrylic Renders
Main menu
Start your project here
Please enter the code in below box.
 
Texture Coatings & Acrylic Renders

E.I.F.S. A.J.S. (Adhesive / Jointing / Skim)

EIFS A.J.S, is a polymer and silicate modified, mineral based, adhesive, jointing compound and / or skim coat. The product is specifically designed for use during the on site installation and finishing of polystyrene wall and fencing panels.

 

A Pre-Blended, Polymer Modified,
Cement Based Compound For Polystyrene Foam.

 

The cured product is waterproof, hard but flexible and provides greater adhesion to the foam than the cohesive strength of the foam itself.

The product is supplied in a 20 kg paper sack. On site mixing requires only the addition of fresh clean water to achieve a smooth, high slump paste. No additional polymer additives are required and should not be added.

 

Pack Size
 
Mix Activation Water
 
Drying Time @ 25°C
[55% Relative Humidity]
 
 
 
Recommended Thinners
 
Wash Up
 
Initial Set Time @ 25°C
 
Minimum Application Temperature
 
Finish Colour
 
Durability
 
 
Curing
 
20kg Paper Sack
 
3.6 to 4.0 litres per bag
 
6 hours [Will vary with
changes in temperature,
humidity and residual
substrate moisture]
 
Water
 
Water
 
30 to 60 minutes
 
5°C
 
Light Grey
 
Exterior / Interior
[Must Be Top-Coated]
 
Not Required
 

 

Suitable Substrates:

EIFS Impact coated foam panels, Polystyrene and Cast Foam.
Satin Enamel

  • AJS


Product downloads
Astec Energy Star | Exterior Paint | Heat Reflective Paint | Paint | Professional Paint | Render | Roof Paint | Texture Coating System | Texture Finishes | Texture Paint | Waterproofing | XML Sitemap | Sitemap